SME has designed, manufactured and installed the cold aisle enclosure for the Data and Communications Center of Málaga City Hall of which contract it was awarded.

The project consist in design of a self-supported cold aisle enclosure customization according to the existing racks in the room without the need of mechanized the racks. With drop ceilings with transparent poly-carbonate sheets, semi-automatic closure sliding doors and blanking panels to cover the space between racks for a right ventilation of the communications equipment.

The air containment system allow to keep front side of the racks to be kept at a temperature lower thant that of the room where the equipment is housed, in order to keep them to the optimum temperature for proper operation. Beside, the detection and fire extinction system has been increased to including inside the aisle enclosure.

The cold aisle enclosure of Málaga CDC has blanking panels installed in the front and rear doors sides with vinyls with the logo of the Data and Communications Center and Málaga City Hall to customize the containment.

Other component of the contract is the rack installed with the similar features of the existing racks in size, color and design to complete the enclosure. SME has supplied 600 blanking panels to cover the space existing in the racks where is not equipment housed.

SME design, manufactures and install cold and hot aisle enclosures in datacenter rooms to improve energy efficiency and favor the hot and cold air flows to reduce energy costs. If you need a customizable solution for your data center room, do not hesitate and contact us, we help you to find the best solution for your project.

Telecommunications equipment and servers generate huge amount of heating in relativiley small areas, such us racks. The heat generated by the equipment network usually stay in the same space and affect the equipment´s efficiency. It is necessary a right air conditioning to keep the servers with the right temperature and avoid breakdowns and faults.

The signs due to heat of these telecommunication equipment are not visible immediately, but they can cause fails in the nodes and inactivity periods.

The refrigeration of racks is a fundamental factor in a data centre. It is necessary a good air conditioning to manage the heat generated by the servers and communications equipment housed in racks. Depending specific needs of the datacenter room, it will be necessary to adapt one cooling system or another.

With a right distribution of the cool and hot air flows you can get a right cooling system and avoid the overheating.

How keep the air cooling in the racks

The inside racks temperature can vary depending of many factors, such as there is space between servers that make the hot air moves to front, the kind of door rack´s perforation (it can be major or minor grade and this can affect the cooling system), the size of the rack and the components integrated inside (maybe there is not enough space to the correct circulation of the air flows or too much space with cover).

  • To guarantee the air entry in the rack: it is necessary space for cool air entry, for that, manufacturer recommend perforated doors. Side panels also help to air entry.
  • Internal ventilation: racks usually include ceiling fans for hot air extraction or cooling. This system with door perforation, front and rear, it would be enough for a right ventilation.
  • Blanking panels: the placement of blanking panels to cover space between servers, favors energy efficiency, avoiding that hot air generated by the equipment goes to front. Beside, blanking panels help to the cool air that come from the door it does not go to the rear, instead air goes directly to the equipment.
  • Do not overload: although the rack is 42U, it is not advisable to place 42 servers of 1U. It is not recommended overload the rack by installing too many equipments. It is advisable to leave at least 1U of height between servers to ensure proper ventilation from the front to rear.
  • Temperature monitoring:  supervise the temperature range for the right working of the equipment is necessary to guarantee the energy efficiency. By placing temperature probes, temperature can be checked in real time, beside to place alarms that can be activated when the temperature is above established limits. This allows to reduce OPEX costs that make it manually.

If you are interested in how to keep your equipment with the right temperature or if you need racks with all the components and configurations for guarantee the righ ventilation of your data center racks, you don´t hesitate to contact us.

Hosting services providers seek to provide infrastructure for their clientes in a fast, reliable and scalable ways without compromising security and with the guaranteeing  the quality of the datacenter. There is where the challengue lies for these providers, in the search of reduce the time to market and datacenter construction. 

As the demands envolve, speed in construction, easily scalable systems, as well reducing planning times are demanded. For this reason, new systems are being developed to help construction risk reduction with modular datacenter

Investment in modular datacenter are growing

Hosting provideres are increasing the investment in modular datacenter, fast manufacturing systems and short time-to-market and installation times. The reasons and adventages of using this kind of small datacenter are the next:   

  • Implementation speed: the manufacture of these modular systems reduce construction times due to these are prefabricated containers in which the differents parts of datacenter are manufacture simultaneosly (racks, power cabinets, condiotioning systems, etc) All the prefabricated modules are integrated in the container.  The envelope are machined quickly reducind until a 50% the time of traditional datacenter construction.  
  • Construction risks reduction: in traditional datacenters there are many agents in the midle od the process, this carry many risk, also the civil works risks. Prefabricated datacenter have a simple assambly  that the same manufacturer can carry out, without including more external agents.    
  • Standardization:  the standards systems creation facilitates the design and manufacturing work, due to hosting providers can choose between datacenter already designed and configurations and modifications are less than in a traditional datacenter.  
  • Flexibility: modular datacenter are flexibles in their integration and configurations options, it allows to colocate more or less racks, conditioning systems, size or power systems

e

The blanking panels are necessary pieces that are installed in server racks to improve energy efficiency and promote equipment cooling. Blanking panels can be made with different materials such as steel or plastic and customized according to the colors of the racks where they are going to be installed. These parts are accessories inside the racks, but do we know all the advantages to using them?

Read More